Time:2014-08-16 09:23:32 | Hits

    

    Brief Introduction of XN-TF-90II (Horizontal Parting)Sand Lined Iron Mold Casting Line

   1. Grinding ball production line is mainly used for the production of grinding ball matched with the ball grinding machine (widely applied to mine, cement and power generation industries). In past times, grinding ball production is manually produced. With the development of technology, now the automatic and intelligent production line has gradually replaced the traditional methods and has become the hot research direction to save energy, reduce consumption, reduce labor intensity, improve operating environment and control grinding ball quality.

   2. Solved problems: On the basis of grinding ball production mechanization, automatic and intelligent technical upgrading is carried out. The main technical problems of the production line include: 1 in respect of the connection between single machine structure design and tie line, design and improve the safety of production control by virtue of systemic simulation technology; 2) solve the problems of poor operating environment, low production efficiency, high energy consumption and quality instability etc. 

   3. Function: 1) output of single machine, single production line and single shift is about as high as 5000 ton/ year; 2) technological yield of grinding ball is about 76%;

   4. Key technological and innovating points: 1) double-station integrating sand-shooting technology is used to ensure the casting system and integrating forming of product sand shooting; 2) resonance cleaning mechanism is applied to achieve high shake-out effect; 3) automatic and intelligent mould temperature control is implemented, in accordance with technological mould pre-heating requirements different specifications of grinding balls; 4) automatic and intelligent vertical insulating casting system technology is applied; 5) integrated technology is applied to achieve automatic cleaning by metal mould assembling blowing and sending the used sand.

   Main characteristics of XN-TF-90II (Horizontal Parting)Sand Lined Iron Mold Casting Line

   1. It is applicable to the production of 40mm-150mm chromium forging ball and austempering ball product with the average machine-hour production capacity of about 2 tons/h;

   2. Applied with ductile and open operational technology and principle, it has higher automaticity. There are four working stations in total and requiring five workers in a production line. 

   3. Casting method: casting with bottom constant-temperature casting machine or multi-point casting ladle;

   4. The equipment possesses over ten patents, which mainly embodies in: double-station core shooter, integrated riser moulding, automatic sand shakeout, automatic purging and intelligent temperature control design (sand shooting mould temperature control of mould condensate case unpacker) and other patents and technological innovations.

   5. The overall production line can be equipped with dust-collecting and smoke-extracting environmental protection devices to satisfy the working environment for modern enterprises.

   XN-TF-90II (Horizontal Parting)Sand Lined Iron Mold Casting Line possesses many an invention and patent technologies:

   1) Sand Lined Iron Mold Casting Line double-station synchronic sand shooting device, Patent No.: ZL201310645530.7

   2) A kind of iron ball-casting mould, Patent No.: ZL201310176185.7

   3) A riser molding and casting cavity integration mould, Patent No.: ZL201310278166.5

   4) A riser molding and casting cavity integration mould, Patent No.: ZL201310278378.3 

   5) A riser molding and casting cavity integration mould, Patent No.: ZL201310299345.7

   6) A riser molding and casting cavity integration mould, Patent No.: ZL201310298286.1

   Relevant technical parameters of XN-TF-90II (Horizontal Parting)Sand Lined Iron Mold Casting Line

   1) (Horizontal Parting)Sand Lined Iron Mold Casting Line model: XN-TF-90II;

   2) Drive mode: pneumatic or hydraulic pressure;

   3) Power supply/ voltage/rated power rate: 380V/50Hz; 75KW

   4) Dimension of the production line: coverage of about 280 square meters.

   5) Action mode: action of the overall production line is intelligently controlled by PLC human-machine interface and synchronically, it can also be controlled by hand.

   6) Required workers in a production line: 5-6 workers.

   7) Operating rate: no-load operating pace is about 40”; production pace: 60~80/ box (45~60 boxes per hour). For details, please refer to Schedule 1.

   8) Annual output capacity per production line: 5000-12000 tons.

   9) Applicable scope: production ofφ40~φ150 chromium forging balls, segments, CADI forging balls and some small and medium-sized castings. 

   10) Standard configuration of mould: configured mould for each specification is about 60 pairs.

   11) Standard configuration of template: 1 pair of template (one piece of upper and one piece of lower template) for each specification.

   12) Configuration of shooter: 1 pair (one piece for upper and lower template respectively) for each specification.

   13) Shooter cooling mode: running water circulating cooling;

   attached list1：

规格	球数（只/副）	单副模具耗铁水量（公斤）	单副产成品重量（公斤）	小时产量（吨）	年生产能力（吨）	理论工艺出品率（%）
φ50	40	30	20	约2	6000	约76
φ60	34	43	31		9200
φ70	24	44	33.6		10000
φ80	20	54	41		12000
φ90	16	60	46.4		13800
φ100	12	62	48		14400
φ110	8	55	42.4		12400
φ120	6	60	46.8		14000
φ130	6	68	54		16000

  Production flow chart of XN-TF-90II (Horizontal Parting)Sand Lined Iron Mold Casting Line

 

Next:Constant-temperature Casting Machine